Standpipe System Inspection
What is a Standpipe System
A standpipe system is a series of pipes at a building, connecting the water supply to hose connections. A standpipe system is an extension of the fire-hydrant system for use by firefighters or trained occupants in the event of a fire in the building.
Standpipe System Testing
Standpipe system testing in Ontario came into effect on July 1, 2018 and all building owners needed to comply by January 1, 2019 according to Ontario Regulation 108/18. Ontario Regulation 108/18 can be downloaded here
Standpipe System Requirements
According to the Reg. 108/18
Section 6.4.3.2.(1):
Standpipe system piping shall be hydrostatically tested for 2 hours at a pressure of not less than
(a) 1400 kPa (gauge), or
(b) 350 kPa (gauge) in excess of the normal hydrostatic pressure when the normal hydrostatic pressure is in excess of
1050 kPa (gauge).
Section 6.4.3.7.(1):
The dry portion of the fire department connection piping of a standpipe system shall be hydrostatically tested … at intervals of not more than five years where:
(a) the fire department connection piping has been in service for more than thirty years, or
(b) the age of the fire department connection piping cannot be determined.
For more information please contact Stevenson Sprinkler and Fire Protection by phone: 905-562-7575 or email: info@stevensonsprinkler.ca
Call Today for a Free Quote: (905) 562-7575
OVER 25 YEARS OF EXCELLENCE
Serving the following areas: Oakville, Milton, Burlington, Hamilton, Ancaster, Guelph, Kitchener, Cambridge, Brantford, Caledonia, Grimsby, Lincoln, Jordan Station, St. Catharines, Niagara-on-the-Lake, Thorold, Smithville, Pelham, Welland, Port Colborne, Fort Erie, Hagersville, Jarvis, Nanticoke, Port Dover, Simcoe, Waterford, Ohsweken, Saint George, Ontario, Canada
AVAILABLE 24-HOUR EMERGENCY SERVICE
P.O. Box 364,
4520 Jordan Road, Suite 1,
Jordan Station, ON L0R 1S0
